Possibly a cheaper roller cage


	[All Forums] [Most Popular] [HL Related] [OEM] [Swap Shop] [Scott's Pics]	Chat Inbox

December 8th Second Chance Cyber Monday Sale!

Logged in as: Guest

Possibly a cheaper roller cage

Printable Version

View related threads: (in this forum | in all forums)

Users viewing this topic: none

All Forums >> [OEM Discussions] >> Polaris >> Possibly a cheaper roller cage

Page: [1]

Message

<< Older Topic Newer Topic >>

Possibly a cheaper roller cage - 3/23/2007 8:39:03 PM

cletus600twin

Posts: 292
Joined: 7/11/2006
From: Thurston, Nebraska
Status: offline

I think I might have a way to get cheaper front roller cages. I see that John Deere's new HPX gator has the same front diff as polaris. I looked up the parts the other day and the roller cage was way cheaper so was the armature plate. I haven't ordered on yet to see if they are the same size. We just got one of those Gators in the other day and I haven't had time to look at the front diff that clode. The parts break down is identical. I will get actual prices tomorrow,

_____________________________

04 600twin blue, ITP Mud Lite XL's on Polaris Vision Bruiser wheels, Highlifter front and rear springs, Heelclicker clutch kit, 800 primary, K/N air filter, Dynojet kit, fan override toggle, reverse override toggle, Automoter electonic temp gauge,custom rear rack(diamondtread), 800 header pipe, Pure Polaris (White Bros) exhaust, Polaris front cargo box, front brush guard, rear bumper, 8" stainless steel atv nuts, SNORKLED finally!

Post #: 1

RE: Possibly a cheaper roller cage - 3/23/2007 8:50:23 PM

scottginfla

Posts: 667
Joined: 6/28/2005
From: sorrento,florida
Status: offline

cool, my local dealer has one also, , when i looked it over the front diff looked very familiar, but i walked out and completly forgot about it until now, we need to look into this .

_____________________________

07 polaris ranger browning xp camo, 6" lift, lot of other stuff
If you are reading this, THANK a teacher. If you are reading this in ENGLISH, THANK a soldier!!!

http://community.webshots.com/user/scottginfla

(in reply to cletus600twin)

Post #: 2

RE: Possibly a cheaper roller cage - 3/23/2007 9:18:28 PM

scottginfla

Posts: 667
Joined: 6/28/2005
From: sorrento,florida
Status: offline

here are prices and part numbers

ROLL CAGE ASSY MIA1667
74.75 USD

KIT, ROLL MIA1666
22.71 USD

KIT, SPRING H-CLIP .008" THK MIA1665
5.52 USD

PLATE, ARMATURE MIA10656
16.67 USD

< Message edited by scottginfla -- 3/23/2007 9:56:01 PM >

_____________________________

07 polaris ranger browning xp camo, 6" lift, lot of other stuff
If you are reading this, THANK a teacher. If you are reading this in ENGLISH, THANK a soldier!!!

http://community.webshots.com/user/scottginfla

(in reply to scottginfla)

Post #: 3

RE: Possibly a cheaper roller cage - 3/23/2007 10:08:40 PM

Red_Raider

Posts: 306
Joined: 1/30/2006
From: Wylie, Texas
Status: offline

What is the world coming to. Never thought you would be able to get John Deere parts cheaper than Polaris parts. My brother-in-law will love this. He works for John Deere and rides Honda. Wait till I tell him my Polaris is made from the same parts as the equipment he sells.

_____________________________

07 Rhino
MSA Tork wheels 12"
27" radial outlaws
Extreme 3" lift
EPI Clutch kit

02 500HO
28" laws
1.5 spacer all around
HL lift
HL lift springs front & rear
CRS Custom snorkels
stock exhaust snorkel with harley pipe

(in reply to scottginfla)

Post #: 4

RE: Possibly a cheaper roller cage - 3/24/2007 6:44:24 AM

DaButcher

Posts: 233
Joined: 1/11/2007
From: North East TEXAS
Status: offline

What is the front dif. assembly price?

_____________________________

Mud Mafia
"We're in tha trash talkin business..........and business is good"

DaButcher Myspace
Mud Mafia Myspace
Pics
06 800 Sportsman
G O R I L L A lift
29.5 Outlaws

(in reply to Red_Raider)

Post #: 5

RE: Possibly a cheaper roller cage - 3/24/2007 6:50:13 AM

pimp800

Posts: 1917
Joined: 2/23/2006
From: Folkston, GA/ Bonaire, GA
Status: offline

well i'm fired up!!!!!!

, i found it in the parts catalog on the site, now i'm going back and its saying that the part # doesn't exist!!!!!! can some one post the link to where you guys found it with the diagram.....

_____________________________

TEAM CREEK BOTTOM #08
08 RC annual"DBM"open class 2008 champion
08 RC annual"DBM"501-up 2nd place for year
08 RC annual"DBM"500-below 3rd for year
ROCKYCREEK 11-1-2008
1ST OPEN CLASS MUDBOG
1ST 501-UP CLASS MUDBOG
2ND 500-BELOW MUDBOG
MUDDERSMAG MUD RUN
1st 800 class swamp-x
1st 400 class swamp-x
3rd 800 class mudbog
SOUTHERNRIDGE MUDBOG
2nd 800 class mudda-x
2nd 400 class mudbog
3rd open class mudbog
ROCKYCREEK MUDBOG 8-1

(in reply to DaButcher)

Post #: 6

RE: Possibly a cheaper roller cage - 3/24/2007 8:14:00 AM

Swamp_Monster

Posts: 6816
Status: online

On the 'model' search I put in *gator*.

After some searching I found it under this model number: 9618 XUV Gator Utility Vehicle 620i (Gas) - 01Mar07

Click on: A04 - XUV Gator Utility Vehicle 620i (Gas)

Click on: Pictorial Index

Click on: 50 - A02 - C10 - POWER TRAIN

Click on: 2 - FRONT DRIVE

_____________________________

Mud Racers!
Click here to check out www.XtremeMudRacing.com
A place for mud racers, by mud racers!

Click Here for the 2009 Xtreme Mud Racing Calendar of Events

(in reply to pimp800)

Post #: 7

RE: Possibly a cheaper roller cage - 3/24/2007 4:08:31 PM

cletus600twin

Posts: 292
Joined: 7/11/2006
From: Thurston, Nebraska
Status: offline

I guess you already beat me to the punch with prices. The entire diff is $1850.00. If you go to your dealer have them look up a XUV gator have the mtype in front differential and it is the highest serial number. THe early serial number gators were a manual engagement. I know for sure if I break my cage I am going to order one from Deere.

_____________________________

04 600twin blue, ITP Mud Lite XL's on Polaris Vision Bruiser wheels, Highlifter front and rear springs, Heelclicker clutch kit, 800 primary, K/N air filter, Dynojet kit, fan override toggle, reverse override toggle, Automoter electonic temp gauge,custom rear rack(diamondtread), 800 header pipe, Pure Polaris (White Bros) exhaust, Polaris front cargo box, front brush guard, rear bumper, 8" stainless steel atv nuts, SNORKLED finally!

(in reply to cletus600twin)

Post #: 8

RE: Possibly a cheaper roller cage - 3/24/2007 6:20:25 PM

pimp800

Posts: 1917
Joined: 2/23/2006
From: Folkston, GA/ Bonaire, GA
Status: offline

do you know for sure it is the same indentical cage???? if so i'm gonna go buy about 2 of these for this price because who knows when it could go up, and i could use one right now as well......................

_____________________________

TEAM CREEK BOTTOM #08
08 RC annual"DBM"open class 2008 champion
08 RC annual"DBM"501-up 2nd place for year
08 RC annual"DBM"500-below 3rd for year
ROCKYCREEK 11-1-2008
1ST OPEN CLASS MUDBOG
1ST 501-UP CLASS MUDBOG
2ND 500-BELOW MUDBOG
MUDDERSMAG MUD RUN
1st 800 class swamp-x
1st 400 class swamp-x
3rd 800 class mudbog
SOUTHERNRIDGE MUDBOG
2nd 800 class mudda-x
2nd 400 class mudbog
3rd open class mudbog
ROCKYCREEK MUDBOG 8-1

(in reply to cletus600twin)

Post #: 9

RE: Possibly a cheaper roller cage - 3/24/2007 6:25:10 PM

backinblack700

Posts: 2992
Joined: 9/2/2006
From: GEORGIA
Status: offline

this might be somethin i need to look into........

_____________________________

CHASE

<----------------
'05 POLARIS 700-
BROKEN AND DEAD= WARANTEE...

'88 KAWASAKI 220 BAYOU-
TWO WORDS= THE PIECE...

'78 FORD F-150-
400M, FAST AND LONG...

'94 RED FORD F-150 4X4-
351W, BIG AND LOUD...

(in reply to pimp800)

Post #: 10

RE: Possibly a cheaper roller cage - 3/24/2007 7:21:26 PM

rubberdown

Posts: 885
Joined: 3/23/2006
From: Niagara Falls CANADA baby!!!!
Status: offline

I have a question, how can the parts inside it be cheaper than the polaris parts, but the entire front gear case is about 3 times more money from john deere at $1850??????

_____________________________

04.5 SP500 HO
**** customs lift kit
**** customs bar ends
**** customs FLAME aluminum fairlead
Snorkels -K&N filter -Dynojet - Amsteel rope
28" t1tan 589's -3 light mod -Front storage box

04.5 400 SP
**** customs stuff

Contact me at
****@yahoo.ca

(in reply to backinblack700)

Post #: 11

RE: Possibly a cheaper roller cage - 3/24/2007 8:01:01 PM

cletus600twin

Posts: 292
Joined: 7/11/2006
From: Thurston, Nebraska
Status: offline

Thats what I was thinking but I swear it sait $1800. I don't know for sure if it is the same one. My parts manager doesn't want to order one in then get stuck with it in stock so I will see if another dealer has one they can give me some measurments on. How many rollers are in a Polaris cage? Also how long and big in diameter is it? If I can I will find out on Monday.

_____________________________

04 600twin blue, ITP Mud Lite XL's on Polaris Vision Bruiser wheels, Highlifter front and rear springs, Heelclicker clutch kit, 800 primary, K/N air filter, Dynojet kit, fan override toggle, reverse override toggle, Automoter electonic temp gauge,custom rear rack(diamondtread), 800 header pipe, Pure Polaris (White Bros) exhaust, Polaris front cargo box, front brush guard, rear bumper, 8" stainless steel atv nuts, SNORKLED finally!

(in reply to rubberdown)

Post #: 12

RE: Possibly a cheaper roller cage - 4/2/2007 7:52:29 AM

mudmanjw

Posts: 302
Joined: 3/22/2004
From: Cut Off, Louisiana
Status: offline

well i had trouble with my fron diff on my 03 sp 700. It would work when it wanted, on when the switch was off off when the switch was on etc. everyone knows the routine. I tore into expecting the worst but found that only an output seal had failed and the internals were veverly dirty. Besides a noisy bearing to replace i don't see any more damage. Cage looks good, rollers are a bit tarnished but i have an extra set. I followed the manual and checked my coil resistance. It was a bit out of spec, 26.8 ohms (range is 22.8-25.2 ohms). I'm thinking that the dirt was the problem and the coil is ok. Does anyone have an opinion on this. Do you guys think that i will have to replace the output cover also for just this little amount out of spec. And did anyone follow up on the John Deere Gator replacement parts. I looked it up and it looks identical. It sure would be nice to find some cheaper replacement OEM quality parts. Thanks in advance for any and all comments and opinions.

_____________________________

03 700 Sportsman
Stealth Snorkels
27X10/12X12" Vampires on Vision 160 Wheels
1-1/2" Lift (Homemade)
1 monkey axle up front
If at first you don't succeed, get a bigger hammer.

(in reply to cletus600twin)

Post #: 13

RE: Possibly a cheaper roller cage - 4/9/2007 7:11:25 PM

down_and_dirty700

Posts: 131
Joined: 4/5/2006
From: Dawson Creek Canada
Status: offline

So has anyone actually tried on yet ?

_____________________________

07 Grizzly 700 EPS
27" Zillas on 12" AMA Climax
2500 Warn
Kimpex rear throne for the lady
Yamaha front bumper and bash plate

04 700 Sportsman Yellow
Full HSP pipe
Clutch kit
26 Gators
28 Zillas

(in reply to mudmanjw)

Post #: 14

RE: Possibly a cheaper roller cage - 4/10/2007 3:34:20 PM

backinblack700

Posts: 2992
Joined: 9/2/2006
From: GEORGIA
Status: offline

has anyone tried it yet or does anyone know it will work yet???

_____________________________

CHASE

<----------------
'05 POLARIS 700-
BROKEN AND DEAD= WARANTEE...

'88 KAWASAKI 220 BAYOU-
TWO WORDS= THE PIECE...

'78 FORD F-150-
400M, FAST AND LONG...

'94 RED FORD F-150 4X4-
351W, BIG AND LOUD...

(in reply to down_and_dirty700)