APEXX Rear Raked Upper & Lower Control Arms CFMOTO U10 Pro

Improved Stability and Stance for Your U10 Pro

Reinforce the rear suspension on your CFMOTO U10 Pro with High Lifter APEXX Rear Raked Control Arms. Our control arms are engineered and manufactured right here in the USA to be stronger and more durable than OEM control arms. Constructed using 1.5” x .120” DOM steel, heat-treated collars and a durable black powder coat finish these arms are built to take a beating. We have also built a 2-inch rear rake into the arms giving you a longer wheel base for better departure angles and more clearance to run larger tires.

Features

• Heavy Duty Construction: Built using 1.5” x .120” DOM steel, heat-treated collars and a durable black powder coat finish for improved strength over stock
• Adjustable Camber: Adjustable collars on the lower control arm allow for 3 degrees of camber adjustment in each direction to dial in your alignment
• Rear Rake: Designed with a 2” rear rake these control arms give you a longer wheel base and more clearance for larger tires.
• Limited Lifetime Warranty: Backed by High Lifter’s legendary lifetime warranty for added peace of mind.

Frequently Asked Questions

• Will I need to reuse my factory bushings when installing these control arms? No, these control arms will come with new bushings to use during installation.
• What makes the rear rake important? Moving the wheels back by 2-inches not only gives you more clearance to install larger tires, but it also increases the wheelbase of your machine. A longer wheelbase will give you more stability at higher speeds and also improve your approach and departure angles for more technical riding.

Benefits

• 40% thicker tube wall than stock arms
• Includes all necessary bushings and grease fittings
• Built for the added strain of running portals
• Accommodates up to a 33” tire

Upgrade your machine to High Lifter APEXX Rear Raked Control Arms and be prepared to tackle any terrain.